Application of Microwave in Textile Printing of Cellulosic Fabrics
Author Affiliations
- 1National Research Centre, Textile Research Division, Dyeing, Printing and Textile Auxiliaries Dept., El-Behouth Str., Dokki, Cairo, EGYPT
Res.J.chem.sci., Volume 4, Issue (9), Pages 41-46, September,18 (2014)
Abstract
Two different commercial reactive dyes; namely Cibacrox Brown P6R and Livafix Brilliant Red P-B were used in printing of cotton fabrics via screen printing technique. The printed fabrics were subjected to microwave irradiation for different periods of time at a power ranging between400 800 W. Another series of samples were subjected to microwave irradiation at different temperatures 50 150oC. The colour strength of the microwave-assisted printed fabrics was compared with that of cotton fabric printed with the same paste, dried and subjected to fixation according to the conventional technique (steaming at 102oC for 15min or thermo fixation for 5 min at 150oC). The obtained results clarified that, the colour strength of the printed fabrics increases as a function of the same microwave power and the exposure time. It was also found that the most effective factor in fixation of the colour from the microwave-assisted printed fabric is the heat energy. Generally speaking, microwave-assisted printed samples acquired K/S similar or higher than that obtained by the conventional thermo fixation technique.
References
- Chinta S.K. and S. Vijay Kumar, Technical facts & figures of reactive dyes used in textiles, International Journal of Engineering and Management Sciences,4(3), 308-312 (2013)
- Tappe H., et al., Reactive Dyes, in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH: Weinheim (2000)
- Ojstrek A., Dolika A. and Fakin D., Analysis of Reactive Dyestuffs and their Hydrolysis by Capillary Electrophoresis, Analytical Sciences December, 24, 1581- 1587 (2008)
- Vijayageetha V.A., et al., Treatment Study of Dyeing Industry Effluents using Reverse Osmosis Technology, Research Journal of Recent Sciences,3(ISC-2013) 58-61 (2012)
- Al-Mousawi S., M. El-Apasery and M. Elnagdi, Microwave Assisted Dyeing of Polyester Fabrics with Disperse Dyes, Molecules, 18(9), 11033-11043 (2013)
- Öner E., Y. Büyükakinci and N. Sökmen, Microwave-assisted dyeing of poly(butylene terephthalate) fabrics with disperse dyes, Coloration Technology, 129(2), 125-130 (2013)
- Ahmed N.S.E. and R.M. El-Shishtawy, The use of new technologies in coloration of textile fibers, Journal of Materials Science, 45(5), 1143-1153 (2010)
- Bhat N.V., M.J. Kale and A.V. Gore, Microwave Radiations For Heat-Setting Of Polyester Fibers, Journal of Engineered Fibers and Fabrics, 4), 1-6 (2009)
- Haggag K., A Review Article of Microwave Irradiation and its Application in Textile Industries, Science Publishing Group (2014)
- Hanna H.L., Haggag K. and El-Shemy N.S., Effect of Microwave irradiation of properties of polyamide Fabric. in 18thEgyptian International Chemical Conference, Chemistry of Human Needs, Hurghada, Egypt 2009
- Kappe C.O., Stadler A. and Dallinger D., Microwaves in Organic and Medicinal Chemistry, 2nd Edn. ed, ed. R. Mannhold, H. Kubinyi, and G. Folkers. Weinheim: Wiley-VCH (2012)
- Nourmohammadian F. and Gholami M.D., An Investigation of the Dyeability of Acrylic Fiber Via Microwave Irradiation, Progress In Color, Colorants And Coatings, 1(1), 57-63 (2008)
- Lin L., et al., Dyeability of Flax Fabric Improved by Urea, Journal of Natural Science of Heilongjiang University,22,74-77 (2005)
- Sun H., et al., The improvement of dyeability of flax fibre by microwave treatment, Pigment & Resin Technology, 34(4), 190-196 (2005)
- Ke G., et al., Effects of corona discharge treatment on the surface properties of wool fabrics, Journal of Materials Processing Technology, 207(13), 125-129 (2008)
- Yoshimura Y., et al., Effect of Microwave Heating on Dyeing, Sen'i Gakkaishi,63(6), 146-151 (2007)
- Xue Z., et al., Improvement in dyeability of wool fabric by microwave treatment, Indian Journal of Fibre & Textile Research,36(1), 58-62 (2011)
- Ahmed K.A., et al., Microwave Synthesis - A Prospective Tool for Green Chemistry and Its Textile Application, Saarbrücken, Germany: LAP LAMBERT Academic Publishing AG & Co. KG (2013)
- Hancock A. and Lin L., Challenges of UV curable ink-jet printing inks-a formulator's perspective, Pigment and Resin Technology, 33(5), 280-286 (2004)
- Savanor Prasanna M., et al., Synthesis, Characterization and Solvatochromic studies of 3-{2-(5-Bromothiazol-2-yl) diazeny l}-4-Bromopyridine-2, 6-Diamine, Research Journal of Chemical Sciences,3(8), 38-43 (2013)
- Ahmed K.A., H.M. El-Hennawi and M.A., El-Kashouti, Microwave Assists the Synthesis of Pyridone azo Dyes and their Application in Polyester Printing, Research Journal of Chemical Sciences, 2(11) 14-19 (2012)
- Ahmed K.A., et al., Synthesis and Evaluation of Novel Fluorescent Dyes using Microwave Irradiation, Research Journal of Chemical Sciences, 3(4), 1-16 (2013)
- Prabhakar Y., Prasad K.R.S. and Kumar J.V.S., Microwave assisted synthesis of 3-(4-Ethylbenzyl)-1-(4-methoxybenzyl)-6-(methylthio)-1, 3, 5-triazine-2, 4 (1H, 3H)-dione derivatives Under solvent free condition with high yields, Research Journal of Recent Sciences, 1(ISC-2011) 105-109 (2012)
- Abo-Shosha M.H., et al., Utilization of Some Fatty Acid/PEG Condensates as Emulsifiers in Kerosene Paste Pigment Printing, Research Journal of Textile and Apparel,13(1), 65-77 (2009)
- AATCC, Colour Fastness to Crocking, in Technical Manual Method,American Association of Textile Chemists and Colorists, 23-25 (1993)
- AATCC, Colour Fastness to Light: Carbon Arc Lamb, Continuous Light, in Technical Manual Method,American Association of Textile Chemists and Colorists, 33-48 199327.AATCC, Colour Fastness to Perspiration, in Technical Manual MethodAmerican Association of Textile Chemists and Colorists, 30-32, (1993)
- AATCC, Colour Fastness to Washing: Characterization of Textile Colorants, in Technical Manual MethodAmerican Association of Textile Chemists and Colorists, 89 (1993)
- AATCC, Colour Fastness to Washing: Characterization of Textile Colorants, in Technical Manual Method American Association of Textile Chemists and Colorists, 89 (1993)
- Kubelka P. and Munk F., Ein Beitrag zur Optik der Farbanstriche, Z. Tech. Phys., 12, 593 (1931)
- Mehta K.T., et al., Estimation of the Kubelka--Munk scattering coefficient from single particle scattering parameters, Dyes Pigments,5(5), 329-340 (1984)
- Waly A.I., et al., Processes of Dyeing, Finishing and Flame Retardancy of Cellulosic Textiles in the Presence of Reactive Tertiary Amines, Research Journal of Textile and Apparel, 16(3), 66-84 (2012)
- Hassabo A.G., et al., Deposition of Functionalized Polyethylenimine-Dye onto Cotton and Wool Fibres, Research Journal of Textile and Apparel, 18(1), 36-49 (2014)
- Jou C.J., Degradation of pentachlorophenol with zero-valence iron coupled with microwave energy, Journal of Hazardous Materials,152(2), 699-702 (2008)
- Stead C.V., Developments in Azo Colorants, Review of Progress in Coloration and Related Topics, 1(1), 23-30 (1967)
- Mijin D.Z., et al., The microwave-assisted synthesis of 5-arylazo-4,6-disubstituted-3-cyano-2-pyridone dyes, Dyes and Pigments, 85(12), 73-78 (2010)
- Haggag K., H.L.B.M.Y. Hanna and N.S. El-Shimy, Dyeing Polyester with Microwave Heating Using Disperse Dyestuffs American Dyestuff Reporter,84(3), 22-35 (1995)
- Hanna H.L., Haggag K. and El-Shimy N.S., Dyeing Polyamides using Microwave Heating with Reactive Dyestuffs, in AATCC International Conference and Exhibiton, Winston-Salem, USA (2000)
- Chang-chun, W.U. and H.E. Liang, Microwave dyeing of cotton fabric, CNKI Journal, 2-7 (2008)
- Liang-hua W.U., et al., The performance of microwave-assisted cellulose dip-dyeing, CNKI Journal, 2-6 (2009)
- Davies R.R., Developments in Reactive Dyes.Review of Progress in Coloration and Related Topics,3(1) 73-80 (1972)
- Schwaebel R., Bayer Farben Revue,13(1), 26-48 (1967)