International E-publication: Publish Projects, Dissertation, Theses, Books, Souvenir, Conference Proceeding with ISBN.  International E-Bulletin: Information/News regarding: Academics and Research

Mixed convection flow and heat transfer in a lid driven cavity using SIMPLE algorithm

Author Affiliations

  • 1Department of Mathematics, Maharaja Agrasen Institute of Technology, Delhi, India

Res. J. Engineering Sci., Volume 13, Issue (1), Pages 15-23, January,26 (2024)

Abstract

In the present study mixed convection flow and heat transfer in steady 2-D incompressible flow through a lid driven cavity is investigated. The upper wall of cavity is moving with uniform velocity and is at higher temperature. The stationary lower wall is kept at lower temperature. The governing equations of the model are solved numerically using SIMPLE algorithm. A staggered grid system is employed for numerical computations for velocity, pressure and temperature. Under relaxation factors for velocity, pressure and temperature are used for the stability of the numerical solutions. Bernoulli equation has been taken up to check the accuracy of the computed solutions. The significant findings from this study have been given under conclusion.

References

  1. Cha, C. K., & Jaluria, Y. (1984)., Recirculating mixed convection flow for energy extraction., International Journal of Heat and Mass Transfer, 27(10), 1801-1812.
  2. Pilkington, L. A. B. (1969)., Review lecture: the float glass process., Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 314(1516), 1-25.
  3. Imberger, J. (1985)., Thermal characteristics of standing waters: an illustration of dynamic processes., In Perspectives in Southern Hemisphere Limnology: Proceedings of a Symposium, held in Wilderness, South Africa, July 3–13, 1984, 7-29. Springer Netherlands.
  4. Moallemi, M. K., & Jang, K. S. (1992)., Prandtl number effects on laminar mixed convection heat transfer in a lid-driven cavity., International Journal of Heat and Mass Transfer, 35(8), 1881-1892.
  5. Iwatsu, R., Hyun, J. M., & Kuwahara, K. (1993)., Mixed convection in a driven cavity with a stable vertical temperature gradient., International Journal of Heat and Mass Transfer, 36(6), 1601-1608.
  6. Mansour, R. B., & Viskanta, R. (1994)., Shear-opposed mixed-convection flow and heat transfer in a narrow, vertical cavity., International journal of heat and fluid flow, 15(6), 462-469.
  7. Iwatsu, R., & Hyun, J. M. (1995)., Three-dimensional driven-cavity flows with a vertical temperature gradient., International Journal of Heat and Mass Transfer, 38(18), 3319-3328.
  8. Prasad, A. K., & Koseff, J. R. (1996)., Combined forced and natural convection heat transfer in a deep lid-driven cavity flow., International Journal of Heat and Fluid Flow, 17(5), 460-467.
  9. Alleborn, N., Raszillier, H., & Durst, F. (1999)., Lid-driven cavity with heat and mass transport., International Journal of Heat and Mass Transfer, 42(5), 833-853.
  10. Guo, G. and Sharif, M. (2004)., Mixed convection in rectangular cavities at various aspect ratios with moving isothermal sidewalls and constant flux heat source on the bottom wall., International Journal of Thermal Sciences, 43(5), 465-475
  11. Sharif, M. (2007)., Laminar mixed convection in shallow inclined driven cavities with hot moving lid on top and cooled from bottom., Applied Thermal Engineering, 27(5-6), 1036-1042.
  12. Oztop, H. F., Zhao, Z. and Yu, Bo (2009)., Conduction-combined forced and natural convection in lid-driven enclosures divided by a vertical solid partition, International Communications in Heat and Mass Transfer , 36(7), 661-668,, undefined
  13. Saha, S., Saha, G., & Hasan, N. (2010)., Mixed convection in a lid-driven cavity with internal heat source., Proceedings of the 13 the Annual Paper Meet, Dhaka, 1-6.
  14. Islam, A. W., Sharif, M. A., & Carlson, E. S. (2012)., Mixed convection in a lid driven square cavity with an isothermally heated square blockage inside., International journal of heat and mass transfer, 55(19-20), 5244-5255.
  15. Ismael, M. A., Pop, I., & Chamkha, A. J. (2014)., Mixed convection in a lid-driven square cavity with partial slip., International Journal of Thermal Sciences, 82, 47-61.
  16. Morshed, K. N., Sharif, M. A., & Islam, A. W. (2015)., Laminar mixed convection in a lid-driven square cavity with two isothermally heated square internal blockages., Chemical Engineering Communications, 202(9), 1176-1190.
  17. Abraham, J., & Varghese, J. (2015)., Mixed convection in a differentially heated square cavity with moving lids., Int. J. of engineering Research & Technol, 1-4.
  18. Zeghbid, I., & Bessaïh, R. (2017)., Mixed convection in a lid-driven square cavity with heat sources using nanofluids., Fluid Dynamics & Materials Processing, 13 (4), 251-273.
  19. Janjanam, N., Nimmagadda, R., Asirvatham, L. G., Harish, R., & Wongwises, S. (2021)., Conjugate heat transfer performance of stepped lid-driven cavity with Al2O3/water nanofluid under forced and mixed convection., SN Applied Sciences, 3(6), 605.
  20. Kumar, S., Panda, S., Gangawane, K. M., Vijayan, A., Oztop, H. F., & Hamdeh, N. A. (2022)., Mixed Convection in a Lid‐Driven Cavity with Triangular Corrugations and Built‐in Triangular Block., Chemical Engineering & Technology, 45(9), 1545-1558.
  21. Ouahouah, A., Kherroubi, S., Bourada, A., Labsi, N., & Benkahla, Y. K. (2020)., Mixed convection flow and heat transfer in a double lid-driven cavity containing a heated square block in the center., In MATEC Web of Conferences, 330, 01010. EDP Sciences.
  22. Patankar, S. V., & Spalding, D. B. (1983)., A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows., In Numerical prediction of flow, heat transfer, turbulence and combustion, 54-73. Pergamon.
  23. Sivakumar, V., Sivasankaran, S., Prakash, P., & Lee, J. (2010)., Effect of heating location and size on mixed convection in lid-driven cavities., Computers & Mathematics with Applications, 59(9), 3053-3065.
  24. Li, Z., & Wood, R. (2015)., Accuracy analysis of an adaptive mesh refinement method using benchmarks of 2-D steady incompressible lid-driven cavity flows and coarser meshes., Journal of computational and applied mathematics, 275, 262-271.
  25. Mohapatra, R. C. (2016)., Study on laminar two-dimensional lid-driven cavity flow with inclined side wall., Open Access Library Journal, 3(3), 1-8.
  26. Earn L. C., Tey, W. Y. and Ken T. L. (2020)., The investigation on SIMPLE and SIMPLER algorithm through lid driven cavity., Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 29(1), 10–22.
  27. Ali, I. R., Alsabery, A. I., Bakar, N. A., & Roslan, R. (2020)., Mixed convection in a double lid-driven cavity filled with hybrid nanofluid by using finite volume method., Symmetry, 12(12), 1977.