Research Journal of Chemical Sciences ______________________________________________ ISSN 2231-606X Vol. 4(9), 51-56, September (2014) Res. J. Chem. Sci. International Science Congress Association 51 Study of Intermolecular Interaction in Binary Mixtures of Paraanisaldehyde with Chlorobenzene, Toluene and Acetone at 313.15KGolamari Siva Reddy and Mallu Maheswara Reddy Centre of Bioprocess Technology, Department of Biotechnology, K L University, Vaddeswaram, Guntur-522502, INDIAAvailable online at: www.isca.in, www.isca.me Received 30th August 2014, revised 10th September 2014, accepted 17th September 2014Abstract The ultrasonic velocity, density and viscosity at 313.15K have been measured in the double frameworks of Paraanisaldehyde with Chlorobenzene, Toluene and Acetone. From the test information different acoustical parameters, for example, as adiabatic compressibility (), free volume (V), Shear relaxation time (), free length (L) and acoustical impedance (Z) ere ascertain. The results are deciphered regarding sub-atomic association between the segments of the mixture. Keywords: Ultrasonic velocity, acoustical properties, molecular interaction. IntroductionUltrasonic is a flexible non-ruinous method and exceedingly helpful for examination of different physico-compound properties, for example, adiabatic compressibility, intermolecular free length, free volume and Shear relaxation time at 313.15k. Late advancements have discovered utilization of ultrasonic vitality in medication, building and farming1-4. The investigation of atomic connection assumes an indispensable part in the improvement of sub-atomic science. Sub-atomic associations and structural conduct of sub-atomic and their mixtures might be distinguished utilizing ultrasonic studies. Ultrasonic waves have been utilized by numerous researchers to explore the way of sub-atomic cooperation and physico-concoction conduct of immaculate, paired and ternary fluid mixtures5-8. Ultrasonic speed together with thickness and consistency information outfit abundance of data about the association between particles, dipoles, hydrogen holding, multi-polar and dispersive powers9-12. Anisaldehyde atom is very polar and self related through hydrogen holding of their amine bunch. In the present work an endeavour has been made to explore the conduct of twofold results of Anisaldehyde with Chlorobenzene, Toluene and Acetone as to adiabatic compressibility, intermolecular free length and particular acoustic impedance from ultrasonic estimations at 313.15 K. Material and MethodsResults of diverse molarity (m) were ready for every paired framework. The ultrasonic speed in the mixtures was measured utilizing a variable way settled recurrence ultrasonic interferometer working at 2 Mhz recurrence (Mittal Enterprises, New Delhi). The exactness of sound speed was ±0.1 ms-1. The thickness and consistency of the mixture were measured utilizing a particular gravity jug (5 ml) and Ostwald's viscometer (10 ml) separately. The precision in thickness estimation was ±0.0001 kg m-3 and that in consistency estimation was ±0.001 mnsm-2. Results and DiscussionDifferent acoustical parameters, for example, adiabatic compressibility (), Intermolecular free length (L), free volume (V), and specific acoustical impedance (Z), were computed utilizing the trial information of ultrasonic sound velocity, density and viscosity by the following equations (1-4).  (1) \n \r\r  (2)  (3)  (4) Where KT is the temperature subordinate steady having an esteem 199.53 x 10-8 in MKS framework, K is the consistent equivalent to 4.28 x 10 in MKS framework, autonomous of temperature of all fluids, and all the documentations having the ordinary implications. The measured parameters viz., ultrasonic velocity (U), density (p), adiabatic compressibility () and viscosity () are given in table -1. Table-1 demonstrates that, in every one of the three frameworks, the velocity increases with concentration of benzene, toluene and acetone. This demonstrates that solid connection saw at higher amassing of X. The consistency values additionally same pattern with speed in these three frameworks. Thickness diminishes in every one of the three frameworks proposing in this manner more relationship in the middle of solute and dissolvable atoms in recent frameworks. Research Journal of Chemical Sciences ___________________________________________________________ ISSN 2231-606XVol. 4(9), 51-56, September (2014) Res. J. Chem. Sci. International Science Congress Association 52 From the same table- 1, it is watched that adiabatic compressibility () expands with expansion in amassing of benzene, toluene and acetone. This expand structural request of paraanisaldehyde may bring about more union, and prompts a build in (). The expand in () brings about a build in the estimation of (U). The free length (L ) is an alternate parameter which is ascertained utilizing ultrasonic speed and adiabatic compressibility. It is watched that Lf, expands with the convergence of benzene, toluene and acetone. It has been watched that intermolecular free length builds with mole part. Build in intermolecular free length prompts positive deviation in sound speed and negative deviation in compressibility. This shows that the atoms are closer in the framework. The figured different parameters like free volume (V) and shear’s relaxation time () are given in table-2. The variety in free volume (V) diminishes with increments in profound quality of benzene, toluene and acetone in each of the three frameworks. The free volume is the space accessible for the particle to move in a fanciful unit cell. These builds shear’s relaxation time (). The varieties in shear’s relaxation time are given in the same table-2. As expressed over the shear’s relaxation time builds with increment in profound quality of benzene, toluene and acetone. The acoustic impedance (Z) is the result of ultrasonic speed and thickness of the result. The estimation of acoustic impedance additionally diminishes with expansion in amassing of benzene, toluene and acetone. Build in Lf and abatement of Z with the amassing of benzene, toluene and acetone; propose vicinity of dissolvable solute connections in three frameworks. The estimation of acoustic impedance (Z) is record. Table -1 Values of ultrasonic velocity (U) and density (), viscosity () and adiabatic compressibility () at 313.15K Mole fraction of Para anisaldehyde Ultrasonic Velocity(U) (m/sec) Density(), gm/mol Viscosity() X10/Nsm-2Adiabatic compressibility( X1010/m N-1 X Chloro benzene Toluene Acetone Chloro benzene Toluene Acetone Chloro benzene Toluene Acetone Chloro benzene Toluene Acetone 0 1240 1262 1116 0.8594 0.8384 0.7564 0.6891 0.5286 0.255 7.7895 7.5602 10.6253 0.1087 1258 1269 1125 0.8401 0.8251 0.7458 0.7056 0.7968 0.2895 7.8965 7.6035 10.5325 0.2125 1259 1278 1138 0.8365 0.8014 0.7381 0.7996 0.8051 0.3054 7.9652 7.7852 10.4698 0.3278 1262 1285 1198 0.8247 0.7658 0.7218 0.8917 0.8842 0.4583 8.0521 7.8963 10.3925 0.4392 1268 1295 1258 0.815 0.7524 0.7154 0.9068 0.8996 0.5589 8.1963 7.9585 10.2069 0.5465 1275 1302 1269 0.7851 0.7214 0.7096 1.0869 1.0759 0.6741 8.2956 8.0635 10.1563 0.6563 1282 1325 1296 0.7712 0.7108 0.7058 1.1532 1.1098 0.9987 8.3017 8.1256 10.0589 0.7635 1299 1338 1305 0.7601 0.7097 0.6998 1.2389 1.2504 1.0568 8.4562 8.2596 9.8563 0.8729 1325 1345 1328 0.7051 0.6997 0.6802 1.3672 1.3862 1.3692 8.5963 8.3956 9.5698 0.9854 1349 1358 1345 0.6985 0.6882 0.689 1.4509 1.4986 1.4597 8.9756 8.8963 9.2631 1 1370 1370 1370 0.6865 0.6865 0.6865 1.5398 1.5398 1.5398 9.0963 9.0963 9.0963 Table-2 Values of free volume (V) and shear’s relaxation time (), free length (L) and acoustical impedance (Z) at 313.15KMole fraction of para anisaldehyde Free Volume(V) X10 /m mol-1Shears relaxation time( x 10-11) Free length (L) (Lf x 1011/m) Acoustic impedance(Z) (Kg/ m.sec-1) X Chloro benzene Toluene Acetone Chloro benzene Toluene Acetone Chloro benzene Toluene Acetone Chloro benzene Toluene Acetone 0 3.9925 6.8125 6.6124 0.7089 0.5389 0.4686 6.609 6.8907 6.4849 1.1687 0.7398 0.7284 0.1087 3.2414 5.9921 4.0052 0.8564 0.6987 0.4589 6.6158 6.9074 6.4905 1.1425 0.6608 0.7365 0.2125 2.8524 4.9785 3.0078 0.9874 0.7345 0.5015 6.6201 6.9157 6.4909 1.0825 0.6497 0.7504 0.3278 2.6587 4.0051 2.3893 1.2125 0.8974 0.5589 6.6315 6.9287 6.4929 1.0297 0.6282 0.7664 0.4392 2.2564 3.0351 2.0362 1.5879 1.2002 0.6574 6.6409 6.9301 6.5021 0.9954 0.6012 0.7857 0.5465 2.0458 2.2365 1.7854 2.0541 1.4542 0.7974 6.6513 6.9485 6.5187 0.9752 0.5954 0.7909 0.6563 1.9802 1.9028 1.5631 2.5497 1.9263 1.1245 6.6602 6.9592 6.5252 0.9564 0.5818 0.8101 0.7635 1.8963 1.4085 1.4025 3.0278 2.5546 1.5102 6.6789 6.9693 6.5314 0.9214 0.5747 0.8154 0.8729 1.7058 1.2036 1.2131 3.5796 3.2548 1.9989 6.6842 6.9694 6.5422 0.9005 0.5714 0.8498 0.9854 1.6985 1.0871 1.0654 4.0478 3.9647 3.2487 6.6906 6.9695 6.5897 0.8854 0.5602 0.8787 1 1.5098 1.0098 1.0097 4.5202 4.5202 4.5202 6.7054 6.9696 6.5974 0.8802 0.5597 0.8802 Research Journal of Chemical Sciences ___________________________________________________________ ISSN 2231-606XVol. 4(9), 51-56, September (2014) Res. J. Chem. Sci. International Science Congress Association 53 Figure-1 Mole fraction versus Density at 313.15K Figure-2 Mole fraction versus Viscosity at 313.15K 0.60.650.70.750.80.850.900.20.40.60.81Density,(g/mol)Mole fraction,X Chlorobenzene Toluene Acetone 0.20.40.60.81.21.41.600.20.40.60.81Viscosity,(X103/Nsm-2)Mole fraction,X Chlorobenzene Toluene Acetone Research Journal of Chemical Sciences ___________________________________________________________ ISSN 2231-606XVol. 4(9), 51-56, September (2014) Res. J. Chem. Sci. International Science Congress Association 54 Figure-3 Mole fraction versus adiabatic compressibility at 313.15K Figure-4 Mole fraction versus Free Volume at 313.15K 6.57.58.59.51010.51100.20.40.60.81Adiabatic compressibility(X1010/m2N-1)Molefraction,X Chlorobenzene Toluene Acetone 00.20.40.60.81Free Volume(VfX107/m3mol-1)Molefraction,X Chlorobenzene Toluene Acetone Research Journal of Chemical Sciences ___________________________________________________________ ISSN 2231-606XVol. 4(9), 51-56, September (2014) Res. J. Chem. Sci. International Science Congress Association 55 Figure-5 Mole fraction versus Shear relaxation time at 313.15K Figure-6 Mole fraction versus free length at 313.15K 0.51.52.53.54.500.20.40.60.81Shears relaxation time(X10-11)Molefraction,X Chlorobenzene Toluene Acetone 6.46.56.66.76.86.900.20.40.60.81Freelength(LfX1011)Molfraction,X Chlorobenzene Toluene Acetone Research Journal of Chemical Sciences ___________________________________________________________ ISSN 2231-606XVol. 4(9), 51-56, September (2014) Res. J. Chem. Sci. International Science Congress Association 56 Figure-7 Mole fraction versus Acoustic impedance (Z) at 313.15K Conclusion The ultrasonic velocity, density, viscosity and other related parameters were calculated. The observed increase of ultrasonic velocity indicates the solute-solvent interaction. The existence of type of molecular interaction is solute-solvent is favoured in all these three systems, confirmed from the Z, U and etc., the existence of solute-solvent interaction is in the order: Acetone�Toluene�Benzene. References1.Megremis S., Chatziioannou M. and Tritou L., J. Ultrasound in Medicine January 29, 145-147, (2010)2.Golamari Siva Reddy and MalluMaheswara Reddy, Densities and viscosities of binary mixtures of methyl ethyl ketone with ethyl benzene at 303.15, 308.15, 313.15 K and atmospheric pressure, Journal of Chemical and Pharmaceutical Research, 5(11), 644-648 (2013)3.Golamari Siva Reddy and Mallu Maheswara Reddy, Thermodynamic properties of binary liquid mixture of toluene with benzene, Int J Pharm Bio Sci Jan;5(1),(B) 1064 – 1073 (2014)4.Golamari Siva Reddy, Mallu Maheswara Reddy, V.Swathi Chowdary and Golamari Krishna Reddy, Physical and Transport Properties of Binary Liquid Mixtures, Asian Journal of Biochemical and Pharmaceutical Research, 4(3), 64-73 (2013)5.Zhang Y., Longman R., Bradshaw R., Odibi A.O., J. Ultrasound in Medicine, April, 30, 459-463 (2011)6.Jambrack A.R., Mason T.J., Paniwnyk L. and Lealas V., Czech. J. Food Sci., 25, 90-99 (2007)7.Saravana Kumar K., Kubendrau T.R., Res.J.Chem. Sci., 2,4,50-56, (2012)8.Aravinthanj M. and N.Dineshbabu et al., Arch.Phys.Res. 2, 1, 254-261, (2011)9.Vodamalar R., Mani D., Balakrishanan R., Res. J. Chem.Sci., 1, 9,79-82 (2011)10.Thirumanan S., Sardha Devi S., Arch.Appl.Sci.Rers., 1, 2, 128-141 (2009)11.Ali A., Tiwari K., Nain A.K. and Charkravarthy V., Ind.J.Phy. 74B, 5, 351-355 (2000)12.Devadss D., Thairiyaraja M. and Palaniappau L., Ind.J. Phy. 77B, , 669-672 (2003) 0.40.50.60.70.80.91.11.200.20.40.60.81Acoustic impedance(ZXkg/m2.sce-1)Molefraction,X Chlorobenzene Toluene Acetone